For your 1994 GMC 3500 with a roll pan bumper we have the Curt hitch part # 13942 as a confirmed fit. This fits without drilling as well. view full answer...
If you need the mounting rails only, you would use Installation Rails, part # RP58058. The rails do not include the hardware to bolt the rails to the under bed brackets. The hardware is part # RP58430.
If you are needing the installation brackets and hardware to mount the rails to the vehicle frame as well as the rails, use part # RP30035. view full answer...
We can definitely help you!
If your trailer and truck connectors are RV-style 7-way blade types we offer extensions in various lengths.
For example, if you need several feet of additional length we offer the Curt Universal 5th Wheel/Gooseneck 7-Way Extension # C56080 which is 7-feet long. If a shorter extension will suffice you might use the 28-inch TorkLift # TLW6028, 36-inch # TLW6036 or 48-inch # TLW6048.
If either your truck or trailer use different connectors (the linked article... view full answer...
Since there is not a custom-fit hitch receiver for your 1960 GMC C/K fleetside, you will want to go with a universal weld-on receiver. The Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 is a popular option for custom vehicles. This is a 2" receiver and fits vehicles with frames under 44"; it has a maximum weight capacity of 16,000lbs and a maximum tongue weight of 1,600lbs. This does have a 7" drop from where the brackets attach to the frame of the vehicle.
If you... view full answer...
We do offer soft tonneau bed covers that fit your 1994 GMC Stepside pickup. All tonneau cover options, including soft roll-up, hatch-style and retractable versions, are shown on the linked page.
We have a soft top cover from Access, part # A22020139, "TonnoSport". TonnoSport is the most affordable Access roll-up tonneau, and it has tons of great features: EZ-Dials for cover tension adjustment, a trigger latch to secure the cover, and a quick clip storage strap to tie it down. Sits 1/2"... view full answer...
From an install point of view the part # TGMRCK25 will still install just fine since the spring attaches to the frame of the truck and not the axle. If the axle is larger or smaller in diameter it would change when the spring engages.
If it was bigger it would engage sooner or if it was smaller it would engage later. view full answer...
DeeZee does indeed offer a Universal Truck Tailgate Mat, part # DZ86700. According to DeeZee, the mat is indeed compatible with the tailgate on your 1988 GMC truck unless the tailgate is equipped with a spray-in or drop-in bed liner. DeeZee tells me that it will match the # DZ86793 you have already purchased.
You can see current pricing by clicking the provided link. view full answer...
You will need one of our Gen-Y stacked receivers to have multiple receivers capable of more than 500lbs of tongue weight. The Gen-Y Rebel X Ball Mount # GY39VR is capable of 6" of drop and the Rebel X # GY99VR is capable of 7-1/2" of drop. Both of these are capable up supporting up to 700lbs of tongue weight. Do be sure to not exceed the capacities of your receiver or tow vehicle.
We also have the Replacement Shank # 325-GH-304 which is rated for up to 1,500lbs of tongue weight with a... view full answer...
The only option I have for a bed mat for your 1993 GMC Sierra with an 8 foot bed would be the DeeZee Truck Bed Mat part # DZ86793.
I checked with Bedrug and they do not make a truck bed rug like the you referenced for your vehicle. view full answer...
Go To Results